The edges really don't need to be super clean since the face of the CompuNurse will cover them. As long as the unit holds well in place everything is fine. Here you have it with all the stuff installed:

If you don't plan on installing a switch, the installation is over for you. Simply reinstall the 5¼-face plate in an empty drive bay and it's done. Note that the drive bay can still hold a hard drive since the CompuNurse and its panel doesn't take much space.

For those of you who want to install an on/off switch, here is the idea. By default, the circuit of the CompuNurse is very simple. You have a battery, which has a positive and negative lead; the CompuNurse also has a negative and positive lead. Connect the + to + and - to - and you have a working device.

Next >>

<< Previous